17
Continuation “
IN 1 Properties
”
:
SAMPLING TIME (S)
The configured value corresponds to the sampling interval. This time interval in seconds defines the time
between the single samples of the analog signals. This parameter directly affects the response time of
the unit.
0,001
Shortest sampling time
0,01
Default value
60,000
Longest sampling time
AVERAGE FILTER
Selectable average filter function to avoid measuring fluctuations.
0
No average value will be created
1
2 numbers of floating average cycles
2
4 numbers of floating average cycles
3
8 numbers of floating average cycles
4
16 numbers of floating average cycles
OFFSET
This parameter defines the zero offset / tara of the input.
This parameter does not affect the TOTALIZATION function.
-99.999
Smallest offset
0
Default value
+99.999
Highest offset
LINEARIZATION
This parameter defines the linearization function.
The linearization points are defined in Menu IN 1 / IN 2 LINEARIZATION.
See appendix.
0
OFF
No linearization
1
1
QUADRANT
Linearization in the 1. quadrant
2
4
QUADRANT
Linearization in all 4 quadrants
TOTALIZATION
This parameter activates the totalization function. The settings will be done in Menu IN 1 / IN 2
TOTALIZATION.
The totalization depends on the operation mode. See chart in chapter IN 1 Totalization.
0
OFF
No totalization
1
ON
Totalization is active
Summary of Contents for BAE010H
Page 1: ...Touch Display BDD 750 _A User s Guide English ...
Page 48: ...48 6 5 Dimensions Dimension in mm inch ...
Page 50: ...50 ...
Page 51: ...51 ...
