Balluff BAE SA-OH-064-NP-DP02, User Manual

Page: 31 / 36

www.balluff.com 13 english
BAE SA-OH-064-_P-DP02 / BAE SA-OH-064-_P-S75G
Photoelectric Sensors
7
Operation (continued)
7.1.4 Signal Delay
Description
This is a function that is applied to an internal binary signal.
This function allows the user to apply time delay functions
to the internal binary signal of the device (On-Delay, Off-
Delay).
Mathematics/Algorithm
Fig. 7-4: Signal delay – mathematics/algorithm
The signal delay can be set using the Del switch (Delay):
Value Description
Off No signal delay
On D On-Delay (50 ms)
Off D Off-Delay (50 ms)
Tab. 8-6: Signal delay
7.2 LED Meaning
Description
Only the signal with the highest priority is displayed. The
signals are listed in descending priority.
Power LED (operating status)
Name Signal Meaning
Error Red Operating voltage not in range.
Signal in hysteresis Green flashing 1 Hz The signal value is in hysteresis.
Ready Green, static The device is ready.
Tab. 8-6: Meaning of LED states - Power LED
Output LED
Name Signal Meaning
Output Yellow Switch output switched.
Tab. 8-6: Meaning of LED states - Output LED