Balluff BAE SA-OH-063-NP-DP02, User Manual

Page: 36 / 38

16 english
BAE SA-OH-063-_P-DP02 / BAE SA-OH-063-_P-S75G
Photoelectric Sensors
The specifications are typical values for 24 V DC at room
temperature.
The product is immediately ready for operation, full
accuracy is achieved after the warm-up phase.
Further data can be found at
www.balluff.com
on the product page.
9.1 General features
Usage category DC13
9.2 Ambient conditions
Ambient temperature -5…+55 °C
Storage temperature -5…+55 °C
Degree of protection as per
IEC 60529
(when attached)
IP40
9.3 Electrical data
Operating voltage 15…30 V DC
Rated operating voltage U
e
24 V DC
Rated operating current I
e
80 mA
No-load current I
0
at U
e
≤ 45 mA
Max. pulsed internal current
consumption
≤ 200 mA
Rated insulation voltage U
i
75 V DC
Readiness delay t
v
≤ 100 ms
Load capacity at U
e
≤ 100 nF
Residual current I
r
≤ 500 μA
Switching frequency 500 Hz
Voltage drop U
d
at I
e
≤ 2.0 V
Short circuit protection yes
Protection against miswiring yes
Reverse polarity protection yes
9.4 Electrical connection
Connection Cable or M8x1
Number of pins 4
9.5 Output / Interface
Output pin 4/black Switch output (NPN or
PNP)
Input pin 2/white Digital input
(External teach-in)
Switching function
(configurable)
NO contact/NC contact
(NO/NC)
9.6 Materials
Housing material PC, PA 12
Contacts Gold-plated
9.7 Mechanical features
Installation Top-hat rail 35 mm
Top-hat rail 15 mm
Dimensions (W × H × L) 13.5 x 75.5 x 32.9 mm
9.8 Approvals and designations
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
Additional information on directives, approvals
and standards can be found at
www.balluff.com
on the product page.
9
Technical data