Balluff BAE SA-OH-063-NP-DP02, User Manual

Page: 34 / 38

14 english
BAE SA-OH-063-_P-DP02 / BAE SA-OH-063-_P-S75G
Photoelectric Sensors
7
Operation (continued)
7.1.4 Signal Delay
Description
This is a function that is applied to an internal binary signal.
This function allows the user to apply time delay functions
to the internal binary signal of the device (On-Delay, Off-
Delay).
Mathematics/Algorithm
Fig 7-8: Signal delay – mathematics/algorithm
The signal delay can be set using the Del switch (Delay):
Value Description
Off No signal delay
On D On-Delay (50 ms)
Off D Off-Delay (50 ms)
Tab. 8-6: Signal delay
7.2 LED Meaning
Description
Only the signal with the highest priority is displayed. The
signals are listed in descending priority.
Power LED (operating status)
Name Signal Meaning
Error Red Operating voltage not in range.
Teach timeout Red on for 2 s A teach was not ended on time.
Teach failed Red on for 2 s The value range in teach is outside the valid value range.
Teach ended Green flashing 1 Hz for 2 s The teach was completed successfully.
Teach mode Green flashing 2 Hz The amplifier is in Teach mode.
Signal in hysteresis Green flashing 1 Hz The signal value is in hysteresis.
Tab. 8-6: Meaning of LED states - Power LED
Output LED
Name Signal Meaning
Output Yellow Switch output switched.
Tab. 8-6: Meaning of LED states - Output LED