Balluf BIS M-41 Series, Technical Description Manual

Page: 37 / 44

BIS M-41_ USER'S GUIDE
30
4
4.4 USB DRIVER INSTALLATION
This paragraph contains instructions for installing the Windows 2000/XP USB driver for
Balluff RFID devices. Complete the following steps before installing the RFID USB driver.
1. Download the RFID USB driver package from www.balluff.com.
2. Extract the driver files to a separate folder on your host computers’ Desktop.
3. Connect the USB interface cable (and power supply, if applicable) as described in par.
2.6.4.
4. Apply power to your RFID device. Windows should detect the new hardware and start
the Found New Hardware Wizard. If it does not, run the Add Hardware applet in
Windows’ Control Panel.
Figure 25 - Found New Hardware Wizard – Do Not Connect to Windows Update
Figure 26 - Found New Hardware Wizard – Install From List
5. Select “Install from a list or specific location” and then click Next.