Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(G)
(G)
(B)
(A)
(H)
STEP 1:
Insert Rod (H) through Holders on each Bracket (G).
STEP 2:
Position Brackets (G) on wall in desired location and mark screw holes with a pencil.
(SEE NOTE BELOW) Make sure marks are level.
FOR MAXIMUM SUPPORT AT LEAST
ONE BRACKET SHOULD BE MOUNTED INTO A WALL STUD.
For screw holes not positioned over wall studs, drill pilot holes and use Anchors (A).
Using a screwdriver, secure Brackets to wall by screwing in the Long Screws (B) through
Brackets and into stud, or through Brackets and into Anchors.
STUD
(B)
POSITION BRACKETS TO ACCOMODATE ROD
If Brackets are postioned too far apart, Finials will not fit.
For 24” Shelf: Center Brackets no more than 16.5“ apart.
For 48” Shelf: Center Brackets no more than 33.5” apart.
NOTE
