(J)
(K)
(H)
(B)
This side up.
(C)
Page 3 of 4
(F)
(A)
(I)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Orient Front Support Posts (J) and Back Support Posts (K) as shown then join each pair
using a Support Bar (H). Insert and tighten Long Machine Screw (B) through hole in Back Support
Post, through Support Bar and into Front Support Post. Gently and fully tighten using Allen Key (D).
Do not overtighten screws
Top (up)
Bottom (down)
STEP 2: Orient Marble Base (I) with finished side up then align both Support Post Assemblies with
holes, add a Ring (F) to bottom of each Post, insert Short Machine Screws (A) with Flat Washers (C)
and fully tighten using Allen Key (D).
(F)
Assemble in location for intended use.
