STEP 3:
Attach the Fixture Body (A) to the Mounting
Plate (C) by screwing on the Ball nut (E).
Page 4 of 4
STEP 6:
Connect breaker and turn on light.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry
cloth
.
Avoid the use of harsh or abrasive chemicals
as they may damage the finish.
NOTE: Before starting installation of this Fixture or the removal of a previous Fixture,
disconnect the power by turning off the circuit breaker or removing the fuse from the fuse box.
STEP 4:
Install light bulb(not included).Use maximum
bulb 60W Type B incandescent bulb or CFL
equivalent.
(E)
(C)
STEP 5:
After securing fixture to the wall it is recommended
that the gap between the wall and fixture backplate
be sealed with any good quality waterproof caulk or
silicone sealant (not included).
(A)
