Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 7:
Determine location for installation and locate Wall Studs in wall. Optimal support is provided
when one side of Shelf is attached to a Wall Stud.
Two or more people lift assembled Shelf to wall
using a Level to adjust. Place on wall and pencil mark ALL HOLES in both top and bottom
Bracket flanges.
Remove Shelf from wall and set aside.
WALL STUD
For maximum support, at least one side should
be centered on a WALL STUD.
SAFETY NOTICE
WALL STUD
STEP 8:
For hole locations on a WALL STUD, place Shelf on wall and drive Screw (B) directly into
Stud. For those locations where no stud is present, follow instructions on Page 5 for installing and
using Expansion Bolts (A).
Tighten Screws to 75%
DO NOT OVER-TIGHTEN
Two or more people required to complete Steps 7 and 8.
STOP
STOP
