Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
IMPORTANT NOTICE
Shelf unit must be fully assembled BEFORE hanging.
At least two people required to lift, mark and install
assembled shelf. Do not assemble on wall.
STEP 1:
Create base by fitting a Glass Shelf (F) over threaded studs on Lower Brackets (C). Secure by
turning Supports with SHORT Studs (D) onto top. Turn until secure. Do not over-tighten.
STEP 2:
Add another Glass Shelf (F) then secure with four more Supports with SHORT Studs (D).
STEP 3:
Add next Glass Shelf (F) then install both remaining Supports with SHORT Studs (D) on
back
side of Shelf as illustrated. Install both Supports with LONG Studs (E) on
front
of Shelf.
(F)
(D)
(H)
(F)
(D)
(C)
(F)
(D)
1
2
(F)
(D)
(E)
LONG STUDS
on front.
3
4
STEP 4:
Add remaining Glass Shelf (F) then secure back by turning and tightening a Flat Finial (H) onto
top of each Support with SHORT Studs (D). Turn until secure. Do not over-tighten.
(H)
LONG STUD
(G)
(I)
6
(G)
5
STEP 5:
Place Upper Bracket (G) onto top by fitting open end over LONG STUD and back end over top
of Flat Finial (H).
STEP 6:
Turn and tighten Ball Finial (I) onto LONG STUD. Turn until secure. Do not over-tighten.
