NOTE:
Remove all parts from box along with any plastic
protective packaging and carefully lay all parts.
DO NOT
discard any packaging until assembly and
installation are complete.
COMPONENTS
INCLUDED:
Page 2 of 4
ENVIRONMENTAL PROTECTION:
This symbol on the product dictates that Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice.
Approved Location for Use: Indoor/Outdoor Environment
Charging Time: Approximately 4-6 hours via USB; 13 hours via solar (depends on sunlight intensity)
Running Time: Approximately 9 hours (low brightness level); 5 hours (medium); 2 hours (high)
CLEANING and CARE:
Periodically wipe down with a soft, clean cloth. Turn off when not in use.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Retain these instructions for future reference.
1 - Shade (A)
3 - Poles (B)
1 - Base (C)
1- DC USB cord (D)
STEP 1: ASSEMBLE LAMP
Thread and turn Poles (B) together then turn and tighten
onto Base (C). Do not over-tighten.
Place Lamp Shade (A) onto top of (B) then gently turn
and tighten together.
ASSEMBLY AND USE
(A)
(C)
(B)
