Page 4 of 10
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
CAUTION:
Fully assembled, the AG7813 umbrella weighs
over 500 lbs.
Moving the umbrella
fully assembled will increase the risk of damage to your umbrella and/or can cause serious
injury.
We recommend a two-person team for assembly and disassembly.
Lg. Hexagon
Wrench
Med. Hex. Wrench
Rotating Hub
Main Frame
(Fig. 1)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
S T E P 1
Base Assembly
Select area to set base frame and place in desired location.
NOTE:
Moving the umbrella will
be difficult once fully assembled. Remove rotating hub from the main frame by removing the
bolt and washer (Fig. 1), set aside bolt and washer for later use in step 2. Screw (4) feet
onto bottom of base frame with supplied (4) screws (Fig. 2). Now, place rotating hub onto
base frame and secure with supplied (5) bolts (Fig. 3). Remove caps from each add-on
weight container and fill with dry playground sand (Fig. 4). The AG7813 base containers hold up
to 400 lbs. of sand. Screw caps back onto each container. Place each add-on weight container
into base frame sections (Fig. 5). Carefully place base lid onto base frame (Fig. 6).
LEVELING:
If needed, adjust frame corners using supplied wrench until frame is level
(Fig. 7).
(Fig. 7)
(Fig. 2)