Page 4 of 7
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Corner Work Surface is equipped with Rotary Levelers under each Leg. If necessary, Unit may
be adjusted by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
(F)
(B)
(C)
(D)
STEP 4: Invert Hutton Work Surface and locate embedded T-nut along side edge. Using Short Screw (B),
Lock Washer (D) and Flat Washer (C) attach Top Connector Bracket (F) as illustrated. Firmly tighten and
secure.
STEPS 4 through STEP 8 illustrate and explain connecting required Hutton Work Surface
and Cabinet Base Units. While selected Units may vary from these illustrations, the
mechanical and hardware connections are the same. (These Units sold separately)
Work Surface