Page 4 of 5
STEP 3:
Determine placement for Shelves (H) then insert Shelf Supports (A) into corresponding
pre-drilled holes inside Console (I). Tilt in and gently lay Shelf upon Supports.
(A)
(H)
STEP 4: (OPTIONAL)
Muliple Casa Florentina Josephina components (each sold separately) may be
joined together into a single unit. First, remove Base Molding (Steps 1 and 2) on sides of units that
abut one another. Push units together and use Connector Brackets (B) to join at seams on back side.
Use a screwdriver to firmly tighten Screws (C).
NOTE: Align cross imprinted into Connector Bracket directly over seam between units. This will
ensure screws are secured into wood side panels and NOT backer board.
(C)
BACK VIEW
Console
Assemble in location for intended use.
WARNING: To prevent a dangerous tip-over accident, units must be
secured together using Connector Plates BEFORE anchoring to wall.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
