Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with a soft cloth. One to two times monthly, apply beeswax polish as needed.
If the Table is uneven, adjust the recessed levelers located underneath the Table Base (F).
Carefully elevate one side of the Table and twist the levelers clockwise or counterclockwise
until the Table is even.
STEP 4:
Page 4 of 4
STEP 3: Carefully flip the Base (F) over and align the four outer holes on the Bridge with the Holes on
the Table Top (E). Secure into place using the Bolts, Lock Washers,and Washers collected in
Step 1. Tighten using the Wrench (D). Carefully flip the Table upright.
Note: Make sure all Bolts are fully tightened before turning the Table upright.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
(E)
(F)
(F)
Bridge
