Align the four center holes on the Bridge with the Base (F). Secure into place using the
Hexagonal Bolts (A), Lock Washers (B), and Flat Washers (C) with the Wrench (D) provided.
STEP 2:
(E)
Page 3 of 4
STEP 1: Lay the Table Top (E) upside down on a smooth, clean surface such as the packaging provided.
Remove the pre-attached Bridge by unscrewing the Bolts, Lock Washers, and Flat Washers
with the Wrench (D).
Note: DO NOT discard Bolts and Washers. Keep for later use in Step 3.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
Bridge
(A)
(B)
(C)
(D)
(F)
Bridge
