18
19
Pairing Your Remotes and Shades
Pairing Your Remotes and Shades
1. Press and release UP button.
Allow the shade to reach its default upper limit.
2. On the back of the new remote,
quickly press and release the
program button twice.
The remote LED will flash amber
and green.
x2
1. Reset the new remote to make sure
you start with a clean slate.
a. Press and hold the program
button on the back of the
remote for 15 seconds. When
the LED stops flashing, release
the button.
The remote LED should flash green,
amber, and red before turning off.
b.
On the new shade, press and
hold the program button for
7 seconds. When the shade
jogs, release the button.
PAIRING YOUR REMOTES
AND SHADES
NOTE
If you don’t press any buttons for 10 seconds while you’re making these
adjustments, the remote will time out. If that happens, just start the
process over.
3. On the new shade, press and
hold the program button for
3 seconds. When the shade LED
flashes green, release the button.
The shade will jog once, and all LEDs
will turn off. The shade is now paired with
the remote.
Legend
Press and hold
Move up
Press and release
Move down
Pair Your Single Channel Remote
You might need to do this if you bought a new remote or
shade. These steps apply only to the new remote or shade.
We preprogrammed your remotes to operate your shades.
However, you might decide to adjust the pairing—for
example, you might lose a remote and need to pair a new
one, or you might buy an additional remote after you buy
your shades. This section shows you how to pair remotes
and shades for a variety of control scenarios.
To make the instructions easy to follow, steps for the
multi-channel remote are separated into their own section.
