Use and maintenance manual
Chipping machine BF150
37
8
STORAGE
End-of-season cleaning is indispensable, as inactivity of the machine for a long time could compromise
the proper operation of the mechanical parts.
It is necessary to store the machine in a place sheltered from atmospheric agents to protect it from bad
weather. Before storage, it is advisable to thoroughly clean the entire machine and lubricate all
mechanical parts to protect it from rust.
The following should be done before putting the machine to rest for long periods:
-
Thoroughly clean the outside of the machine.
-
Carry out a general visual inspection of the machine to detect any structural damage, any deep
scratches on the paintwork and any damage to the hydraulic hoses.
-
Check that the original safety pictograms are present in their positions and that they are intact
and legible.
-
Grease the mechanical parts according to the previous section.
The
BALFOR s.r.l.
company declines all liability for malfunctioning and warranty in the event that the
storage and maintenance recommendations are not followed
.
