Use and maintenance manual
Chipping machine BF150
26
6.1
EXHAUST DUCT ADJUSTMENT
The ejection duct for the shredded material can be adjusted to three different positions depending on
where you want to discharge the product.
ATTENTION!
Under no circumstances must the exhaust duct be directed towards the
operator's workstation.
The exhaust duct of the chipping machine can be swivelled through 270°. To do this, you must
lower the lever that engages the duct (1), rotate the duct to the desired position, and then release
the lever. Caution: Once the duct has been rotated, check that the lever is engaged and prevents it
from rotating.
The duct is arranged so that it cannot be directed towards the operator.
270°
