28
ENGLISH
EN
2. Maintain the speed of the engine at the level required to perform cutting work, and never
raise the speed of the engine above the level necessary.
3.
If the unit starts to shake or vibrate, turn off the engine and check the whole unit. Do not
use it until the trouble has been properly corrected.
4. Keep all parts of your body away from rotating cutting attachment and
hot surfaces.
5.
Never touch the muffler, spark plug, or other metallic parts of the engine
while the engine is in operation or immediately after shutting down the
engine. Doing so could result in serious burns or electrical shock.
6. While operating the machine be always sure of a safe and secure
operating position especially when using steps or a ladder.
If someone comes
1. Guard against hazardous situations at all times. Warn adults to keep pets
and children away from the area. Be careful if you are approached. Injury
may result from flying debris.
2. If someone calls out or otherwise interrupts you while working, always be
sure to turn off the engine before turning around.
Maintenance
1. In order to maintain your product in proper working order, perform
the maintenance and checking operations described in the manual at
regular intervals.
2.
Always be sure to turn off the engine before performing any
maintenance, checking procedures or working on the machine.
(1) Check ok!
WARNING
The metallic parts reach high temperatures immediately after stopping the engine.
3. When replacing the cutting attachment or any other part, or when replacing the oil or any
lubricant, always be sure to use only original spare parts.
4. In the event that any part must be replaced or any maintenance or repair work not
described in this manual must be performed, please contact a authorized service center
for assistance.
5. Do not use any accessory or attachment other than those recommended for the unit.
6. Under no circumstances should you ever take apart the product or alter it in any way.
Doing so might result in the product becoming damaged during operation or the product
becoming unable to operate properly.
Summary of Contents for BXHT 6025
Page 20: ......
