Baldwin Boxall BVMBC, Installation Instructions Manual

Page: 8 / 24

BVMBC Battery Charger
Installation Instructions
2
BVMBC Installation Manual issue 2
1.2 BVMBC B
ATTERY
C
HARGER
S
PECIFICATIONS
Table 1.1 — BVMBC Specifications
Parameter Specification
Maximum Battery Capacity 5 x Vigil 3 Amplifer Modules : 150Ah
4 x Vigil 3 Amplifier Modules : 150Ah
3 x Vigil 3 Amplifier Modules : 150Ah
2 x Vigil 3 Amplifier Modules : 100Ah
1 x Vigil 3 Amplifier Module : 55Ah
Minimum Battery Capacity 1-5 x Vigil 3 Amplifer Modules : 40Ah *
Charge voltage @ 20°C 27.35V
Temperature compensation -48mV/°C
Battery low fault voltage 21V
Battery deep discharge cut off voltage 18V
Battery high resistance fault 22m

(above set-point) ***
Aux dc output voltage 30V (mains present)
Battery Voltage (mains not present)
Aux dc output max current 2A
Volt-free fault relay output contacts 100V @ 1A Max
Front Panel Indications
Power on
Battery or Amplifier Supply Present
OK No fault
Fuse ** No supply from connected Vigil 3 amplifier(s)
AC mains not connected to Vigil 3 amplifier(s)
Vigil 3 amplifier(s) internal 12V supply failed
Vigil 3 amplifier(s) internal 180V supply failed
BVMBC Aux DC output failed
Charger ** Vigil 3 amplifiers (s) DC charging supply <28V
Charge voltage >29V
Charge voltage <21V
Battery Hi Res ** Battery resistance greater than set-point**
Battery Low Volt ** BVMBC battery voltage <21V
Vigil 3 amplifier(s) battery voltage <21V
N
OTE
: * Ensure maximum charge rate is not exceeded:

5 x Vigil 3 Amplifier Modules - max charge 10A

4 x Vigil 3 Amplifier Modules - max charge 8A

3 x Vigil 3 Amplifier Modules - max charge 6A

2 x Vigil 3 Amplifier Modules - max charge 4A

1 x Vigil 3 Amplifier Module - max charge 2A

Refer to Battery Manufacturer’s specification for details.