Baldwin Boxall BVMBC, Installation Instructions Manual

Page: 17 / 24

BVMBC Battery Charger
Installation Instructions
BVMBC Installation Manual issue 2
11
The threshold settings are as shown below;
Table 2.3 — Battery Hi Res Fault Threshold
SW6 SW7 Threshold
OFF OFF 9
ON OFF 11
OFF ON 13
ON ON Battery resistance checking disabled
2.5 T
EMPERATURE
C
OMPENSATION
The BVMBC is factory set for a charge voltage of 27.35V at 20°C
with temperature compensation of -48mV/°C.
In order for the BVMBC to accurately monitor the battery
temperature an external temperature sensor lead (UP1070) must
be connected to the T/SENS input on the rear panel (see item B
of Figure 2.4).
The temperature sensor must be attached to the battery negative
cable as close to the batteries as possible.