13
ENEN
OPERATION GUIDELINE
MAX AND MIN RECORD
TEMPERATURE
1.Press “ ” to check maximum and minimum temperature and
humidity, the value will display for 5 seconds.
2.Press “ ” button second time to check the minimum temperature
and humidity, the value will display for 15 seconds.
3.Press “ ” button third time will return to standard mode
4.When in max record or min record display mode,press and hold the
“ ” button to clear the max and min record
5. Normally, the Max and Min record will update every 24 hours at 0:00.
1. After power on ,the indoor temperature will display automatically, it will
update reading each 30 seconds and start to receive outdoor signal
which lasts for max 3 minutes.
2. Indoor temperature display range:-10
℃
~ 50.0
℃
(14
℉
~122
℉
); for
temperature lower than -10
℃
(14
℉
),the reading will be :“LL.L”; for
temperature higher than +50
℃
(122
℉
),the reading will be :“HH.H”.
3. Outdoor temperature display range :-40
℃
~60
℃
(40
℉
~140
℉
); for
temperature lower than-40
℃
(40
℉
),the reading will be :“LL.L”; for
temperature higher than +60
℃
(140
℉
),the reading will be :“HH.H”.
4. Arrow indication for temperature changes:
5.Accuracy: For temperature between 0
℃
~50
℃
(32
℉
~122
℉
),the
accuracy is ±1
℃
,if out of this range the accuracy will be ±2
℃
.
Temperature resolution is 0.1
℃
(0.1
℉
).
Remark: The reading will be more accurate standing still for half an hour
after power on
will display when the reading increase by 1
℃
within one hour or
compared with last reading
will display when the reading decrease by 1
℃
within one hour or
compared with last reading.
SET/MEM
SET/MEM
SET/MEM
SET/MEM