NOTES
:
(1).Make sure the RCC function is ON or you can set it by 3.3 MANUAL
SETTINGS → Detailed Steps → refers to point 2.
(2).Make sure the time zone is correct (Default time zone is Eastern
Standard Time) or you can set the time zone by 3.3 MANUAL
SETTINGS → Detailed Steps → refers to point 3.
(3).When receiving RCC signal, please keep the weather station close
to the window or receive RCC signal outdoors to enhance the signal
reception.
*RCC Symbol Display:
a.When receiving signal , RCC symbol “ ” will be flashing.
b.When signal successfully received, LCD will display the complete RCC
symbol “ ” and exit RCC receiving.
c.If no signal is received, the RCC symbol will disappear.
After the 3 MINUTES RF signal receiving, the main unit will start searching
WWVB radio signal for 7 minutes.
1. The antenna symbol “ ” will flashing during receiving time, if signal
received, the main unit will display the received time/month/date/weekday
with symbol “ ”displaying on screen.
2. Auto receiving RCC signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00
each day. It starts receiving RCC signal at UTC 7:00 everyday, once signal
is received at any above time, it will stop receiving signal that day.
3. Manual receiving: press and hold “RCC/SET” button to enter RCC signal
receiving.
4.During receiving, no response if press other buttons, you can press and
hold “RCC/SET” button to exit RCC receiving.
3.2 RCC FUNCTION
6
