Baldan ASDA, Instruction Manual

Page: 24 / 46

Instruction Manual
ASDA
- 22
DEPTH ADJUSTMENT ADJUSTMENT OF THE AUTOMATIC TYNE RELEASE
04 - The depth control of the mounted ASDA-H is done by adjusting the
wheels (1). To do this, loosen bolts (2) move the wheel up or down
and fasten the bolts.
06 - The automatic tyne disarming are shipped with determined resis-
tance regulation, ie with 33.5 cm in width of the spring.
No need for regulations in other di-
sarmament system for the tynes. They
begin disarming, check soil condi-
tions, which must be very hard or high
degree of compaction.
Never work with springs with a length less than 33.5 cm,
as this may lock the system and damage the subsoiler.
For better use of a vibratory operation, operate with
the lowest possible pressure, since in normal working
conditions, do not disassemble the tyne.
Figure 17
NOTE
1
2
3
4
05 - At this time also adjust the
wheel scraper (3) by loosen
bolts (4), Keep a free space
between wheel and scraper
of 10-20 mm and fasten the
bolt (4).
33.5 CM
Figure 16