2
General SafeTy
1) Always read and follow the fluid manufacturers’s
recommendations regarding the use of protective
eye wear, clothing, gloves, and other personal
equipment.
2) Never alter or modify any parts of this product;
doing so may cause damage and/or personal
injury.
!
CaUTIOn
Read these safety warnings and
instructions in this manualcompletely,
before installation and start up of the
IMPOrTanT
!
control handle. It is the responsibility of the purchaser to
retain this manual for reference. Failure to comply with
the recommendations stated in this manual will damage
the control handle and void factory warranty.
Maximum Fluid Pressure 1000 PSI. Under no
circumstances should the control handle be aimed
at any person or your own body at anytime.
Personal
injury may result.
CaUTIOn
!
WarnInG
Airborne particles and loud noise
hazards.
Wear ear and eye protection.
!
Do not place your hand or fingers
over the dispensing nozzle and/or
aim the nozzle at a person at any
time. Personal injury may result.
WarnInG
!
WarnInG
DanGer:
Not for use with fluids
that have a flash point below
100°F ( 38°C, examples: gasoline,
alcohol). Sparking could result in
an explosion which could result in
death.
!
Always use the following Pressure
Relief Procedure whenever
shutting off, cleaning, or in any
way checking or servicing the
control handle:
WarnInG
!
1) Disconnect compressed air line or turn off power
supply at the fluid pump.
2) Point the control handle outlet into a waste
container and open trigger to relieve pressure.
3) Open any bleed-type supply air valves and fluid
drain valves in the system.
4) Leave the drain valves open until you are ready to
re-pressurize the system.
PrODUCT SPeCIfICaTIOnS
1000 psi maximum
•
Oval Gears
•
Dispenses in quarts
•
Totalizes in quarts
•
Four extra valve covers included for fluid ID
•
-red, blue, yellow, green (standard - black)
Inlet screen included
•
Choice of rigid, flex, or flex 90 lances
•
Manual tip
•
1/2” NPT inlet
•
1/2” NPT outlet
•
Warranty Code D
•
