BALCO PrintMaker, Instruction Manual

Page: 14 / 24

14
Additional Settings
The following section provides further information about the Tools main menu which includes
Network, Preheat Settings, General Settings and About sub-menus.
4.1 Network
4.1.1 Wi-Fi
1.
Connect to wi-fi by selecting the ON/OFF button
2.
Choose a network from the list and input the password
3.
When connected, the wi-fi symbol will display on the top of the main menu
4.1.2 Ethernet Connection
1.
Simply follow the prompts on screen by connecting the ethernet cable attached to your
modem into the back of the 3D printer
2.
Once connected, a tick will appear on screen
4.1.3 Cloud Connection
To connect to either Polar Cloud or Flash Cloud, you must have a working internet connect via Wi-
Fi or ethernet. Secondly, you will need to register an account – to do this, visit one of the following
websites and follow the prompts to register an account:
•
Polar Cloud – polar3D.com
•
Flash Cloud – https://cloud.sz3dp.com/
Further instructions are provided under
section Operation and Printing on page 17