REPLACEHEATER 06/25/2014
©2014 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue
|
Tustin, CA 92780
|
p
714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
42270_A
– Place your new heater in the system rack.
– Tighten the 2 nuts to secure
the heater in place.
– Reinsert your 2 sensors.
STEP 5
INSTALL HEATER CABLES, NUTS AND SENSORS
STEP 6
APPLY NYOGEL 760G TO THE HEATER POWER MALE TERMINAL
STEP 6
REINSERT THE POWER TERMINAL
– Use a flat stick apply NYOGEL 760G
to all 3 sides of the heater
power male terminal.
Apply NYOGEL 760G here.
– Reinsert the heater power plug. When you
hear a CLICK, this means the power plug is
inserted correctly and locked in place.
– Reinsert the spa cover and tighten the 2
screws.
– Turn on power to the system and ENJOY!
PLUG N’
CLICK
Applying NYOGEL
to a stick
