1. User’s Pads
Temperature controls
When either of these pads are
touched once, the LCD
will display the temperature which has been set,
as well as the words “set heat." Each time either of these
pads is pressed again, the set temperature will increase or
decrease, depending on which pad is pressed. After 3
seconds, the LCD will automatically display the spa
temperature.
Light
Turns light on or off. The light will
automatically turn off after some period
of operation.
Time
Press to view time of day, press again to view
temperature. Current spa temperature display
will automatically resume after 3 seconds.
Jets control
Touch this pad once to activate the low speed of
the pump. Touch again to start the high speed
of the pump. (If the spa has a 2nd pump, press the pad a
third time and the high speed of pump 2 will also activate.
Press the pad again and only pump 2 will be operating.)
Press the pad again to deactivate the pump(s). The low
speed of the pump starts automatically when the heater is
turned on, when a filter cycle is activated, or when a
freezing condition is detected. If automatically activated,
the low speed of the pump cannot be turned off with the
“jets” pad; however, the high speed of the pump may be
started. Whenever the high- or low speed of the pump is
started with this pad, it will automatically stop after some
period of operation.
Blower
Starts or stops the blower for aeration in the spa.
The blower will also automatically stop after
some period of operation.
2. Liquid Crystal Display
Continually shows operating status of the spa, as well
as the various monitoring functions and
programming information.
3. Owner’s Pads
Program function
Initiates time setting, filter programming, and
panel lock routines.
Mode function
Switches spa operation to either the economy or
standard mode. In the economy mode, the spa
will heat only during the filter cycles. In the standard mode,
the preset spa temperature will be maintained. This pad
also resets the control in the rare instance of an overheat
(See Center Display Messages).
3
Welcome to the Balboa Digital Control.
Your control panel consists of three main parts:
