Revolution
Transforming the Control of Hot Tubs
82
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
What Priming Mode does:
Each time the spa is powered up, it will enter Priming Mode. The purpose of
Priming Mode is to allow the user to run each pump and manually verify that
the pumps are primed (air is purged) and water is flowing. This typically requires
observing the output of each pump separately, and is generally not possible
in normal operation. Priming Mode lasts 4 minutes, but you can exit it earlier
by pressing any Temp button. The heater is not allowed to run during Priming
Mode.
NOTE:
If your spa has a Circ Pump, it will turn on with Jets 1 in Priming
Mode. The Circ Pump will run by itself when Priming Mode is exited.
Programming
Setting an order and time for planned events, such as filter times, clean-up
cycle, etc.
