background image

42256_A

01-09-14

5

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.   All material copyright of Balboa Water Group.

The Spa Screen

All Equipment Access  

The Spa Screen shows all available equipment to control, as well as other features, like Invert. The display shows icons that 
are related to the equipment installed on a particular spa model, so this screen may change depending on the installation. 

The icon buttons are used to select and control individual devices. 

Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the state that the  
equipment is in. Below are some examples of 2-speed Pump indicators.

Jets High

Jets Low

Jets Off

If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity, but outside of Priming Mode, the Circ Pump 
cannot be controlled directly. 

NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in the center when the 
heater is running.

Ready in Rest Mode
Heating

Back

Jets 1

Jets 2

Jets 3

Light

Invert

Summary of Contents for BP Series





























Reviews: