37
Installing Spa-Side and Optional Dolphin Base Transceiver Modules
1. Position both receivers away from any cables (such as
power lines, extension cords, cable lines, and
phone lines).
2. Mount the RF Module far away from large metallic
objects (such as fences, aluminum siding, metal piping,
and rain gutters).
3. Be sure there are no metal objects between the
transceiver and the wireless, in-home panel or between
the receiver and the pool/spa (for Dolphin use).
4. Position the receiver so that the arrow is
pointing upward.
5. Position as high off the ground as possible:
Make sure the RF Modules give you the proper range
before mounting permanently. The closer an RF module
is mounted to the ground, the less range it will have.
6. Important: Clear line of sight between the transceiver
and the wireless, in-home panel provides the best range
(performance). (For Dolphin Use: Clear line of sight
between the receiver and the pool/spa provides the
best range.)
7. CAUTION: With these noted tips in mind, experiment
by placing receiver(s) in different places to find the
best range before permanently mounting the receiver(s)
to the wall. The performance/range may vary from site
to site.
SPA-SIDE RF BASE TRANSCEIVER MODULE
INSTALLATION
1. Mount the transceiver module in a vertical position with
the molded arrow pointing up.
2. Run the cable back to the low-voltage compartment of
the Poolux Control Center and plug the
connector into the 6-pin connector J5 labeled
WIRELESS TRANSCEIVER.
DOLPHIN RF RECEIVER MODULE INSTALLATION
1. Mount the receiver module in a vertical position with the
molded arrow pointing up.
2. Run the cable back to the low-voltage compartment of
the Poolux Control Center and plug the connector into
the 6-pin connector J31 labeled DOLPHIN RF.
Fig. 28 Preferred “Unobstructed” Pool and Spa Receiver Location with Insteon
Suitable “unobstructed” receiver installation
Insteon
GUIDELINES FOR INSTALLING THE RF MODULES
