19. Thread the rope through the pulley attached to the black
Tri-Loop with pulley on the same side of the Reformer as the
pulley block and pull back toward the tower. Figure M.
20. Thread the rope through the upper, outer pulley on the pulley
blockblock and pull back toward the carriage. Figure N. See
Figure O for a detailed view of the tower pulley rope routing.
21. Using a Soft-Touch connection Figure P, secure each end of
the rope to a grey Tri-Loop on the same side of the Reformer
as the riser.
22. Repeat steps 18-21 for the other side of the Reformer.
IMPORTANT SAFETY NOTE:
Use of the Konnector system in a manner for which it is not intended may result in equipment damage
and/or injury to the user. Intense cardio work utilizing jarring movements may overload the system. Balanced Body is not responsible
for injuries caused by equipment misuse.
Questions? Call Balanced Body Technical Support at 1-800-PILATES (US and Canada), or +1-916-388-2838 (all other countries).
WARNING: Using the existing shoulder posts with a Konnector system can cause the loops to fall off the posts during use which
may cause serious injury.
Figure P
Figure M
Figure N
Figure O
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-455 | 10.24.18
