How to Assemble
the Pilates IQ® Reformer
Thank you for purchasing the Balanced Body® Pilates IQ
Reformer. The following step-by-step instructions provide
guidance for assembly and installation.
NOTE:
Prior to assembly, check the parts and components you
received against the following list. If you are missing any parts,
please contact the Balanced Body customer service department
at 1-800-PILATES (1-800-745-2837)
PARTS LIST
Frame and Carriage
1
Assembled IQ Reformer frame and carriage,
with five (5) springs pre-attached
1
Frame handle (219-050)
2
1- 1⁄4” Socket head cap screws (203-002)
1
Ropes (210-026) (pair)
1
Loops (101-005) (pair)
1
Footbar (950-124)
2
Risers and Pulleys (950-126)
4
6-32 by 3⁄8” Allen cap screw (203-001)
4
#6 Fender washer, Black (201-040)
4
IQ Reformer knob (602-011)
1
Bungee cord (900-005)
IQ with Library wheels
2
Brackets with transportation wheels/casters (702-005)
IQ with Wheelbarrow wheels
2
Wheel brackets (702-006)
4
Furniture sliders (602-031)
Included Tools
1
5⁄64” Allen wrench
1
3⁄16” Allen wrench for frame handle
1
5⁄32” Allen key for wheel installation
Photo Notice
The photos in this document show the IQ with wheelbarrow
wheels in some and library wheels in others. Unless specifically
noted, these pictures do not affect the installation procedure
regardless of which wheel set you have.
IMPORTANT NOTE:
Knobs
Follow the arrow decals next
to each knob post to loosen/
tighten the frame as shown in
Figure A. If you force the knobs
in either direction they may
break.
INSTALLING THE KNOBS
1. Refer to Fig. B for knob parts
2. To protect parts from damage during shipping, your IQ
Reformer comes with the frame and footbar knobs detached.
Four knob posts are located at the on stationary portion of the
frame.
Figure A.
Figure B.
Knob cap
6-32 Allen cap screw
Washer
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-108 | 06.26.13
