How to assemble, move and
store your balanced body
Pilates iQ reformer
®
1-800-PILATES (1-800-745-2837) • 916/388-2838 • Fax 916/379-9277
8220 Ferguson Avenue • Sacramento, CA 95828
w w w.pilates.com • [email protected]
Parts list
Prior to assembly, check the parts and components you received against
the following list. if you are missing any parts, please contact the balanced
body customer service department at 1-800-Pilates (1-800-745-2837).
One (1) Assembled IQ Reformer frame and carriage, with five
(5) springs pre-attached
One (1) Frame handle (219-050)
Two (2) 1-1/4” Socket head cap screws (203-002)
Two (2) Ropes (RP3000)
Two (2) Loops (101-105)
One (1) Footbar (702-003)
Two (2) Risers and Pulleys (702-007)
Two (2) Brackets with transportation wheels/casters included
for library wheel version only (702-019)
Two (2) Wheel brackets for wheelbarrow wheel version only
(702-200)
One (1) Bungee cord (900-005)
Four (4) furniture sliders for wheelbarrow version only
(215-001)
Two (2) Pins with Detent Rings located in the riser holes near
the head-end of the frame (GEN9038)
tools you will need
3/16 Allen wrench for frame handle (included)
5/32 Allen key for wheel installation (included)
Thank you for purchasing the Balanced Body Pilates
IQ Reformer. The following step-by-step instructions
provide guidance for assembly and installation.
notice
Photos:
The photos in this document show the IQ with wheelbarrow wheels in
some and library wheels in others. Unless specifically noted, these pictures do
not affect the installation procedure, regardless of what wheel set you have.
Knobs:
The knobs on the sides of the IQ both rotate in the same direction.
Arrows indicate the correct direction to loosen them.
attacHing tHe frame Handle
For shipping purposes the IQ frame handle comes unattached. The handle
makes it easier for you to lift the IQ
into the upright storage position. To
install the handle, insert the two large
socket caps screws through the holes
in the handle and into the head-end
of the frame as shown (see photo).
Use the 3/16 Allen wrench to tighten
the screws.
Location of screws for handle at
the head-end of the frame
IQ with “wheelbarrow” wheels
IQ with
library
wheels
