Balanced Body Clinical Reformer How To Assemble Download Page 3

Page: 3 / 3

Ropes threaded through chrome
eyestraps and cam cleats

Footbar on last hole

Tongue of footplate in bracket

Footplates supported by footbar

Install your padded footplate

Pull out the two round knobs on the

trunion plates and slide the footbar

all the way to the foot end of the

reformer. Loosen the two black knobs

on the back of the frame beneath

the built-in standing platform. Place

the tongue of the padded footplate

into the aluminum bracket on the

inside of the frame with the padded

side facing the carriage. Tighten the

two black knobs on the back of the

frame. Slide the footbar forward until

it clicks into the fourth hole. This

should bring it into firm contact with

the back of the padded footplate for

support while in use.

If you have any questions,

please call Balanced Body

at 1-800-PILATES

(1-800-745-2837) or

916-388-2838.

Summary of Contents for Clinical Reformer

Page 1: ...obvious crate damage bring it to the attention of the freight company driver immediately so that you can open it in his presence to verify any possible damage to the contents This would include holes...

Page 2: ...ur hardware package Install the riser blocks to the outside of the frame at the head end The long slots in the risers go to the top with the fully rounded edges facing out Start both screws in a riser...

Page 3: ...k of the frame beneath the built in standing platform Place the tongue of the padded footplate into the aluminum bracket on the inside of the frame with the padded side facing the carriage Tighten the...