Physical Placement
It is recommended that you provide for at least 6" of free space around the unit for proper
ventilation.
Mount the unit on a hard surface with proper ventilation underneath.
Do not stack the VK-500 power amplifier on top of other units, nor vice versa.
IMPORTANT NOTES
:
To assure reliable operation always turn the VK-500 OFF while making or changing
input or speaker connections. No connections should be made while the
amplifier is ON.
If the VK-500 was turned OFF for any reason, wait at least 30 seconds before
turning it back ON.
Power Connection
The VK-500 is a true Dual Monoblock design with two separate power cord connections (one
for each channel) and two front panel power switches. Due to the amplifier’ high power
rating, it is important to assure the good quality power line for each channel. If separate
circuit outlets are used for left and right channels, it is recommended that both circuits be
connected to the same phase of the power line. Otherwise, a high level of hum can be
present.
