10
BalanceBox
®
650 Floor Support
docu
m
ent
num
ber
:
9
029
36
-00
8
Place the floor support against the wall. If needed reposition the top and bottom wall bracket.
Mark at least 4 holes per wall bracket, 2 holes left and 2 holes right. Do this for all 3 wall brackets.
Remove the floor support from the wall and drill the holes. Mount the floor support to the wall.
9
Define how high the BalanceBox
®
650 needs to be. Use the mounting height calculator on the website.
Depending on the BalanceBox
®
650 version the interface brackets need to be mounted as shown below.
Loosen the nuts in order to adjust the height of the interface brackets. After adjusting tighten the nuts well.
Fl
oor
to
w
al
l brack
et:
5
–
30 cm
/
2
–
12 in
Mini
m
al
hei
ght:
200
cm
/
80 in
BalanceBox
®
650 Mk.1 (Grey):
484A07, 484A08, 484A09, 484A10
BalanceBox
®
650 Mk.2 (Black):
484A17, 484A18, 484A19, 484A20
≥ 2
≥ 2
Tighten:
25 Nm
18 ft-Lbs
