6
INITIAL START-UP
General Instructions
Balance Living
TM
Precision LIFE TRACK body analysis scale applies BIA (Bioimpedance
Analysis) technology. A weak electrical current (less than 1 mA) flows through the
body to detect the bioimpedance and estimate body fat, body water, muscle mass
and bone mass.
This BIA technology is inexpensive, safe, non-invasive, non-toxic, and harmless
(except as stated in the previous Contraindications section). It is simple to operate
and provides abundant information.
Insert the Batteries
STEP 1.
Slide the battery door open (located on back of scale).
STEP 2.
Insert four 1.5V AAA batteries into the battery compartment according to the
polarity indications marked inside the compartment.
STEP 3.
The digits “88888” (image A) are visible on the LCD when the batteries are inserted
correctly.
STEP 4.
Replace battery door
STEP 5.
Wait until the digits “0.0 lb” (image B) are visible on the LCD.
CAUTION
1.
Remove batteries if the device is not planned to be used for a period of time
greater than two weeks.
2.
Worn batteries are harmful to the environment. Do not dispose with household trash;
contact your local waste or recycling facilities for proper disposal guidelines.
WARNING:
No modifications of this equipment are allowed; Device may need re-calibration after two
years of service; Please dispose of ACCESSORIES, detachable parts, and the ME EQUIPMENT according to the
local guidelines; Please use ACCESSORIES and detachable parts specified/ authorized by MANUFACTURE,
otherwise it may cause damage to the unit or danger to the user/patients.
A
B
