Balance KH 5525, Instruction Manual

Page: 22 / 34

- 20 -
Before straightening
• The hair should be clean, dry and free of styling
products.
• Comb the hair thoroughly before straightening
so that there are no knots in it.
• To achieve an especially good straightening result,
spread special products for hair straightening
through the hair.
• Divide the hair into manageable portions and
secure the upper portions to the head with grips
so that they do not get in the way.
Changing the ceramic
plates
Selecting the correct ceramic plates
Select the ceramic plate suitable for the task:
• Narrow ceramic plates
t :
For styling and structuring medium length to
short strands and fringes.
• Wide ceramic plates y :
For straightening wider hair strands.
Note:
NEVER use diverse sized ceramic plates at
the same time. Risk of burns!
Attention!
In all cases the ceramic plates
t
/
y
MUST
be cooled down before they are exchanged.
Risk of burns!
Removing the ceramic plates
1.
Remove the power plug e from the wall socket.
2.
Grasp the ceramic plate t / y on the side at
the upper end. Pull it out of its guide rail.
3.
Use the same procedure with the second cera-
mic plate
t / y .
Fitting the ceramic plates
1.
Slide the selected ceramic plate t / y with the
open side at the front in the guide rail on the
hair straightener until it audibly engages.
2.
Use the same procedure with the second cera-
mic plate
t / y .
Heating-up times
The given heating-up times are guiding figures. They
can vary, subject to other influences.
Heat levels Temperature
Heating-up time,
narrow ceramic
plates
Heating-up time,
wide ceramic
plates
Heating
level 1
150°C
2 min. 3 min.
Heating
level 5
160°C
2 min. 15 sec. 3 min. 15 sec.
Heating
level 10
170°C
2 min. 30 sec. 3 min. 30 sec.
Heating
level 15
180°C
3 min. 4 min.
Heating
level 20
190°C
3 min. 30 sec. 4 min. 30 sec.
Heating
level 25
200°C 4 min. 5 min.
IB_KH5525_Haarglaetter_EN5.qxd 29.08.2007 10:18 Uhr Seite 20