5
Indicating the barometric
pressure trend is rising
Indicating the barometric
pressure trend is steady
Indicating the barometric
pressure trend is falling
7. Thermometer
7.1 RF Transmission Procedure:
The main unit automatically starts receiving transmission from outdoor thermo
sensor for outdoor temperature after weather condition setting.
The thermo sensor unit will automatically transmit temperature signal to the main
unit after batteries inserted.
For having more than one external transmitter (Maximum3), select the Channel,
CH1, CH2 or CH3 to ensure each sensor is transmitting difference channel before
inserting batteries. The channel select switch (D5) is at the back of the thermo
sensor.
If main unit failed to receive transmission from outdoor thermo sensor in first 3
minutes after the batteries inserted (“- - . –”display on the LCD), hold “Channel”
button (B4) for 3 seconds to receive transmission manually. RF icon “
” flashes
on the LCD
Note: Buttons (except “Channel” (B4) &“Light” (B6) buttons) will not function while
scanning for thermo sensor’s signal unless they are well received or stopped
manually.
7.2 Temperature& Humidity
(1) Outdoor Temperature--- Channel Selection
Press “CHANNEL” button (B4) to view the 3 Channel’s temperature. The sequence is
shown as follow:
PRESS “CHANNEL” button PRESS “CHANNEL” button PRESS “CHANNEL” button
Display the three
channels alternatively
When viewing the record on CHANNEL 1 or 2, or 3, hold “CHANNEL” button (B4) for 3
seconds to cancel the record on this channel manually, and receive the transmission
from channels automatically again.
(2) Outdoor Temperature Trend
