Balance Meteo 865823, Manual

Page: 7 / 12

“ ” is shown on the LCD if minimum Temperature/Humidity is shown.

Hold “MAX/MIN” button (B11) for 3 seconds to clear the recorded maximum and minimum reading.
Outdoor Thermo Sensor Unit Registration Procedure:

The main unit automatically starts receiving transmission from Outdoor Thermo Sensor after Weather condition
setting. Outdoor temperature digits (A8) blinks.

Insert the batteries in the Thermo Sensor Unit. The sensor unit automatically transmit temperature to the main
unit. ( Battery compartment (D5) of thermo sensor is located behind the back cover, unscrews to open.)

For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2 or CH3 to ensure
each sensor is transmitting at difference channel before inserting batteries. The channel select switch (D4) is at
the back of the thermo sensor unit.

Press “TX“ button (D7) on the thermo sensor unit to transmit temperature to the main unit manually. The main
unit gives a “beep” sound if it received the temperature.
Display Outdoor Temperature :

Press “CHANNEL” button (B6) to view the 3 Channels’ temperature. The sequence is shown as follow:
Press Press Press
“CHANNEL” button “CHANNEL” button “CHANNEL” button
Display the three
channels alternatively

Hold “ CHANNEL” (B6) button for 3 seconds to cancel unused channel. It will automatically register a new
channel again if a new channel is received.
If there is no temperature displayed in existing channel ( “ - - . –“ is displayed on the LCD ), hold “CHANNEL”
button (B6) for 3 seconds to cancel that channel and receive the channel again (“Beep” sound can be heard.)
Then, press “ TX “ button (D7) on the thermo sensor unit to transmit signal to the main unit manually

The trend pointer displayed (A2) indicates the trend of the outdoor temperature.
“ ” indicates the outdoor temperature is increasing.
“ ” indicates the outdoor temperature is steady.
“ ” indicates the outdoor temperature is decreasing.

Press “ °C /°F” button (D6), on the Thermo Sensor unit, to select Temperature to be displayed in Celsius mode or
Fahrenheit mode.