Balance Meteo 865823, Manual

Page: 4 / 12

D1: Transmission Indication LED D2: Outdoor Temperature
D3: Wall Mount Hole D4: Channel Select Switch
D5: Battery Compartment D6: “C/F” button
D7: °TX” button D8: Stand
D9: Temperature Sensor Probe and Plug
Set Up:

Insert batteries.

Use a pin to press the RESET (B12) button
Weather Forecast Function:

After Batteries inserted, or holding “WEATHER” button (B7) for 3 seconds, Weather Icon (A11) blinks. Enter the
current weather condition by pressing “
▲
“ (B8) or “
▼
“ (B9) buttons. Press “WEATHER” button (B7) to confirm
the setting. The weather forecast may not be accurate if the current weather condition entered is not correct.

The current weather status should be entered again if the altitude of the weather station is changed.
( Barometric pressure is lower at higher altitude location. Therefore, altitude change will affect the weather
forecast) The weather station will start the first forecast at 6 hours after the current weather status is
entered.Totally 5 different weather condition in the weather forecast.
“ ” means Sunny .