Work Smart - Feel Good
EnergyByLight Safety
For your safety
The EnergyByLight is designed according to the latest standards, manufactured with the greatest care,
high-quality materials and extensively tested. Nevertheless, its use may pose a risk to persons or
cause material damage.
Please read the instructions and the installation steps carefully before use.
Failure to do so may result in injury or material damage. Always keep this manual
for future reference and keep it accessible.
• The EnergyByLight is intended for biodynamic (task) illumination of a workplace in
dry indoor areas at a maximum ambient temperature of 25 degrees Celsius.
• Safety class
• Protection class
• Only use the EnergyByLight if it is in good technical condition
Electrical Safety
• Fire hazard: Do not place any objects on top of the EnergyByLight.
Do not cover the EnergyByLight with a blanket, cloth or other objects.
• Do not use the EnergyByLight in damp areas, do not allow the EnergyByLight to
come into contact with water/moisture.
• Connect the EnergyByLight to an earthed mains socket which is technically in order.
• Ensure that the mains connection corresponds to the connection details of the
EnergyByLight.
• Do not pull the mains cable out of the socket by the cable, but by the plug.
Never do this with wet hands.
• Ensure that the power cable is not damaged (during operation). If it’s damaged,
it must be replaced by an original cable from the supplier or a similar qualified person
in order to avoid a hazard.
• If the power cable is damaged, pull it out of the power socket immediately.
Never use the EnergyByLight with a damaged power cable.
• Before carrying out any work on the EnergyByLight, the power cable must be
disconnected from the socket.
• The light source of the EnergyByLight cannot be replaced. If the LED has reached
the end of its service life, the entire product must be replaced.
UK
5
