Baker Band Resaw - Rev 1, 09/08;
WWW.BAKER-ONLINE.COM
3
INTRODUCTION
Thank you and congratulations
on the purchase of your new
Baker B/BX Band Resaw
. It
has been designed to be durable, productive and easy to use. When properly ran and
maintained, it will provide you with many years of profitable operation.
For safety reasons, and for your own best use of the
Baker B/BX Band Resaw
, we insist
that you read this manual fully, and constantly review and refer back to it as necessary.
No one should attempt to operate or perform maintenance on this equipment until they have
been trained and taken the time to read and understand the information contained in this
manual.
** FAILING TO DO SO MAY RESULT IN SERIOUS INJURY **
Machine Purpose
The
Baker B/BX Band Resaw
was designed to have a two point feed works allowing for
running random width materials. The head rig can be adjusted up or down while the conveyor
stays at a fixed height making it easier to interchange and integrate with other material
handling systems.
Machine Function
The
Baker B Band Resaw
is equipped with a 20 HP electric motor and accepts material up
to 6” x 12” (15 cm x 30 cm) and uses a 6” wide conveyor while the
Baker BX
is equipped with
a 30 HP electric motor and accepts material up to 12” x 12” (30 cm x 30 cm) with a 12”
conveyor. Both models are capable of variable speeds from 20-120 feet per minute as well as
Baker’s exclusive guide system that includes guide plates and guide roller.