24
Status LED colours
There is a colourful dot on the touch screens homepage and colourful led on top of the screen
indicating the state of the heat plate.
Green indicates that set‐point have been reached and system is working properly. The set
point is defined with tolerance that you have set.
Yellow indicates that system is working towards reaching set point. No actions is required and
this appears every time you change the set point temperature.
Orange indicates that the current temperature value is out of tolerance defined in the alarm
settings. Controller triggers alarm and will start work toward recovery from out‐of‐range
value. Check your device for misplacements.
Red indicates that there is a problem with the heat plate controller unit. Turn off the system
and turn it on again. If the problem is not solved with restart, contact provider.
To set temperature
Click temperature tab on the
homepage. Modify temperature
set point by cl and ‐
After modification, click “Set” to
save changes or “Cancel” to cancel
changes.
Settings
To enter settings press
icon, while following menu will appear.
