Test Sequence, voltage & applicable standards
2/24/2010 | 71-018 V11 EN
D12R, D6R, D3R Users Manual
20
Note:
Although the CRT display is accurately calibrated, it is not possible to set the voltage
exactly. It is suggested that the test voltages be rounded off to the nearest graticule
discernable on the display.
Applicable Standards
−
EASA Standard AR100-1998 Recommended Practice for the Repair of Rotating Electrical
Apparatus
−
IEC 60034-1 (1999-08) Consolidated Edition, Rotating Electrical Machines Part I: Rating
& Performance Ed. 10.2
−
IEEE 43-2000 Recommended Practice for Testing Insulation Resistance of Rotating
Machinery
−
IEEE 95-1977 Guide for Insulation Maintenance of Large AC Rotating Machinery
−
IEEE 112-1991 Test Procedures for Polyphase Induction Motors and Generators
−
IEEE 113-1985 Guide on Test Procedures for DC Machines
−
IEEE 115-1983 Test Procedures for Synchronous Machines
−
IEEE 429-1972 Evaluation of Sealed Insulation Systems for AC Electric Machinery
Employing Form-Wound Stator Coils
−
IEEE 432-1992 Guide for Insulation Maintenance for Rotating Electrical Machinery (5hp
to less than 10,000hp)
−
IEEE 434-1973 Guide for Functional Evaluation of Insulation Systems for Large High-
Voltage Machines
−
IEEE 522-1992 Guide for Testing Turn-To-Turn Insulation on Form-Wound Stator Coils
for Alternating-Current Rotating Electric Machines.
−
NEMA MG1-1993 Motors & Generators
Reprints or EASA standards are available from:
1331 Baur Boulevard
St. Louis, MO 63132
Phone: 314-993-2220
FAX: 314-993-1269
Reprints of IEC standards are available from:
International Electrotechnical Commission (IEC)
www.IEC.ch
Reprints of IEEE standards are available from
:
IEEE Customer Service
445 Hoes Lane
P.O. Box Piscataway, NJ 08855-1331
Phone: 1-800-678-IEEE
Fax: 908-981-9667
www.ieee.org
Reprints of NEMA standards are available from:
National Electrical Manufacturers Association (NEMA)
Global Engineering Documents
Phone: 1-800-854-7179
International: 303-379-2740