© 2018 Baker Hughes, a GE company, LLC. All rights reserved.
96 |
=
BHGE
Checking Switch Operation
ValVue Commands
This procedure gives an example, using the settings in Figure 26, to see if a switch is operating:
1. Click the
Configure
tab, click and Figure 26 appears.
Figure 26 I/O Configure
2. Switch from
Normally Opened
to
Normally Closed
or vice versa, click
OK
and
Apply
Changes
.
3. Click the
Check
tab.
4. Select
Command 142 Read Switches
from the pulldown list and click
Send Cmd
.
The information field below populates with the configured switch states.
Ensure that the switch just reconfigured has changed state.
