background image

Tech Field Support & Warranty:

Phone: +1-866-827-5378

[email protected]

bakerhughes.com

Copyright 2021 Baker Hughes Company. All rights reserved. Baker Hughes provides this information on an 
“as is” basis for general information purposes. Baker Hughes does not make any representation as to the 
accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, 
to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose 
or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect, consequential or special 
damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim 
is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make changes in specifications 
and features shown herein, or discontinue the product described at any time without notice or obligation. 
Contact your Baker Hughes representative for the most current information. The Baker Hughes logo and 
Masoneilan are trademarks of Baker Hughes Company. Other company names and product names used in 
this document are the registered trademarks or trademarks of their respective owners.

BHMN 51-52-53-Series-IOM-31188D-0121 

01/2021

Direct Sales Office Locations

Find the nearest local Channel Partner in your area:

valves.bakerhughes.com/contact-us

valves.bakerhughes.com

Australia

Brisbane

Phone:   +61-7-3001-4319
Perth

Phone:   +61-8-6595-7018
Melbourne

Phone:   +61-3-8807-6002

Brazil

Phone: +55-19-2104-6900

China

Phone: +86-10-5738-8888

France

Courbevoie

Phone: +33-1-4904-9000

India

Mumbai

Phone: +91-22-8354790

New Delhi

Phone: +91-11-2-6164175

Italy

Phone: +39-081-7892-111

Japan

Tokyo 

Phone: +81-03-6871-9008

Korea

Phone: +82-2-2274-0748

Malaysia

Phone: +60-3-2161-03228

Mexico

Phone:   +52-55-3640-5060

Russia

Veliky Novgorod

Phone: +7-8162-55-7898
Moscow

Phone: +7-495-585-1276

Saudi Arabia

Phone: +966-3-341-0278

Singapore

Phone: +65-6861-6100

South Africa

Phone: +27-11-452-1550

South & Central 

America and the Caribbean

Phone:   +55-12-2134-1201

Spain

Phone: +34-935-877-605 

United Arab Emirates

Phone: +971-4-8991-777

United Kingdom

Phone: +44-7919-382-156

United States

Houston, Texas

Phone: +1-713-966-3600

Summary of Contents for Masoneilan 51 Series









































Reviews: