Copyright 2010 Baker Hughes Company.
2 | PACE Calibration Manual–English
Symbols
Symbol
Description
This equipment meets the requirements of all relevant European safety directives. The
equipment carries the CE mark.
This equipment meets the requirements of all relevant UK Statutory Instruments. The
equipment carries the UKCA mark.
This symbol, on the equipment, indicates that the user should read the user manual.
This symbol, on the instrument, indicates that the user should refer to the user manual.
This symbol, in this manual, indicates a hazardous operation.
Ce symbole, sur l’instrument, indique que l'utilisateur doit consulter le manuel d’utilisation.
Ce symbole, dans le manuel, indique une situation dangereuse.
This symbol warns the user of the danger of electric shock.
Ce symbole alerte l’utilisateur sur le danger de choc électrique.
Druck is an active participant in Europe’s Waste Electrical and Electronic Equipment
(WEEE) take-back initiative (directive 2012/19/EU).
The equipment that you bought has required the extraction and use of natural resources
for its production. It may contain hazardous substances that could impact health and the
environment.
In order to avoid the dissemination of those substances in our environment and to diminish
the pressure on the natural resources, we encourage you to use the appropriate take-back
systems. Those systems will reuse or recycle most of the materials of your end life
equipment in a sound way. The crossed-out wheeled bin symbol invites you to use those
systems.
If you need more information on the collection, reuse, and recycling systems, please
contact your local or regional waste administration.
Please visit the link below for take-back instructions and more information about this
initiative.
WARNING
Turn off the source pressure(s) and carefully vent the pressure
lines before disconnecting or connecting the pressure lines. Proceed with care.
Only use equipment with the correct pressure rating.
Before applying pressure, examine all fittings and equipment for damage.
Replace all damaged fittings and equipment. Do not use any damaged fittings
and equipment.
Do not exceed the maximum working pressure of the instrument.
This equipment is not rated for oxygen use.
